370
Flail Mower
- Heavy-duty gearbox and drive shaft
- Heavy-duty hood and end plates
- Side-slicer knives or optional smooth-cut knives available
- Heavy-duty gearbox and drive shaft
- Heavy-duty hood and end plates
- Side-slicer knives or optional smooth-cut knives available
- Heavy-duty gearbox and drive shaft
- Heavy-duty hood and end plates
- Side-slicer knives or optional smooth-cut knives available
- Heavy-duty gearbox and drive shaft
- Heavy-duty hood and end plates
- Side-slicer knives or optional smooth-cut knives available
Features
All John Deere flail mowers feature this rugged, heavy-duty gearbox with a continuous 65-hp rating and an intermittent 90-hp rating. Another feature included is a five-year, unlimited-hour warranty.
Base equipment side-slicer knives are good all-purpose knives. They provide aggressive cutting action in tough conditions.
The side-slicer knife characteristics are as follows:
- Knives are made of heat-treated alloy steel for durability.
- Individual knife weight, along with the centrifugal force created, provides an aggressive cutting action.
- Edges are ground to provide a sharp cutting surface and reduced horsepower requirements.
Smooth-cut knives can be ordered as an option:
- Smooth-cut knives utilize the same mountings as the side-slicer knives.
- These optional knives are good for grassy, weedy conditions and are self-cleaning.
- Knives can also be resharpened for added wear life.
The hood and end plates are designed for heavy-duty applications:
- Hood is made of 0.48-cm (0.188-in.) thick steel to resist denting and wear.
- End plates are made of 0.64-cm (0.250-in.) thick steel to provide structural support and resistance to side thrusts.
- Full-length torque tube helps prevent twisting when operating on uneven ground.
All machines have a Category 2/1 3-point hitch. Bushings or reversible pins are included for Category 2/1 compatibility.
The 360, 370, and 390 Mowers with centrally mounted hitches are suited for normal cutting conditions:
- 360 Mower is compatible with quick-coupler Category 1 only.
-
370 and 390 Mowers are compatible with quick-coupler Category 1 and 2.
The 390 Mower with a 30.5-cm or 66-cm (12-in. or 26-in.) hitch offset to the right is ideal for trimming along walls, buildings, trees with low-lying branches, fences, or orchards.
Specs & Compare
Key Specs | 370 Current Model |
Cutting width | |
Cutting height | |
Blades - Number | |
Blades - Type | |
Rotor - Diameter | |
PTO | |
Tractor horsepower required - Minimum | |
Tractor horsepower required - Maximum | |
Quick-coupler compatible | |
Weight - Approximate | |
Machine | |
Cutting width | Centered Centered 1.8 m 71.5 in. |
Cutting height | 13 to 127 mm 0.5 to 5 in. |
Hood thickness | 4.8 mm 0.19 in. |
Blades | |
Number | 122 (66 pairs) |
Type | Heat-treated Reversible Side-slice (Optional Smooth-cut Cupped Knives) |
Tip speed | |
Rotor | |
Speed | 1,850 rpm |
Diameter | 114 mm 4.5 in. |
Drives | |
PTO | 540 rpm |
Gear case (cont. rating) | |
Belts | Heavy-duty HC section |
Gauge roller | 140 mm 5.5 in. |
Tractor HP Required | |
Minimum | 22 kW 30 hp |
Maximum | 56 kW 75 hp |
3-Point Hitch | |
Dimensions | |
Overall width | 2.1 m 81 in. |
Overall height | 0.99 m 39 in. |
Overall length | 1 m 40 in. |
Weight | |
Additional information | |