120
Drawn Flail Shredder
- Front rubber deflectors
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
- Front rubber deflectors
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
- Front rubber deflectors
- Heavy-duty gearbox
- Steel rotor bearings
- Convenient rear grease fittings
Features
Drawn tractor hookup
Drawn tractor hookup
Rubber deflectors will not dent or rust
Rubber deflectors
Heavy-duty John Deere-designed gearbox
Gearbox
A heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:
- Gearbox has a constant-duty rating of 150 hp and a maximum rating of 225 hp.
Steel rotor bearings for increased bearing life
Rotor bearings
The rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.
The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.
Specs & Compare
ADD MODEL
Power requirements | 120 Current Model |
| Tractor PTO hp range | 67-200 kW 90-200 hp |
| Tractor RPM | 1,000 rpm |
| Gear case | |
Knives | |
| Number of knives | 160 |
| Knife dimensions | |
| Knife mounting system | 7.87 x 63.5 x 143 mm 0.31 x 2.5 x 5.63 in. |
| Type | Heat-treated, reversible, side-slicer, hard-faced, tungsten-carbide knives optional |
| Knives overlap | |
| Tip speed | 171 km/h 106 mph |
Rotor | |
| Rotor speed | 1,500 rpm |
| Rotor diameter | 139.7 mm 5.5 in. |
| Rotor bearing | Sealed, self-aligning; piloted housing, auxiliary seals, and grease cavities |
| Bearing size | 41.15 mm 1.62 in. |
Drivetrain | |
| Belts | Power-band, triple 5VX |
| PTO drivelines | |
Mainframe | |
| Hitch | Drawn |
| Hood thickness | 6.35 mm 1/4 in. |
| Safety deflector | Yes |
| Gauge wheels | 7.60-15 infinitely adjustable row spaces |
| Warning lights | |
Cutting capacity | |
| Cutting width | 6.1 m 20 ft |
| Cutting height | 7.6 to 25.4 cm 3 to 10 in. |
Dimensions | |
| Transport width | 2.4 m 7.8 ft |
| Transport length | 7.3 m 24.1 ft |
| Weight | 2,100 kg 4,630 lb |
Optional equipment | |
| Easy transport | Yes |
| Constant velocity joint driveline | Yes |
| Skid shoes | |
Additional information | |
Offers & Discounts
No current offers.
Accessories & Attachments
Miscellaneous
Deflectors - Rubber - BP18050
Deflectors - Steel - BP16572
Steel deflectors
Rubber deflectors
Deflectors can be used on the front of the shredder to prevent cut material from being thrown forward. Rubber deflectors are recommended when shredding in rocky areas.
Driveline with Overrunning Clutch and Constant Velocity Joint, 1-3/4 In. Drive - AP40461
Driveline with Overrunning Clutch and Constant Velocity Joint, 1-3/8 In. Drive - AP40459
Driveline with Overrunning Clutch, 1-3/4 In. Drive - AP40460
Gauge Wheel Support - BP17320
Additional gauge wheel
Additional gauge wheels can be ordered, if needed, for improved cutting performance.
Lateral Skid Plate - AP40006
Safety Warning Light - BP18226
Warning lights
Transport warning lights are standard on the 520 Integral Flail Shredder and optional on the 520 Drawn Flail Shredder.
Wheel and Tire (7.60-15 6PR) - BP18208